BlackBerry Pearl 8110 codes
Posted on 06 July, 2011. Tags: BlackBerry, Pearl, 8110, codes
Note: NO SIM is needed to unlock the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
If your phone is a 3G phone (ie. z8): On the home screen/lock message, enter 057
How to Enter Unlock Codes on BlackBerry 7100/7130/7130c:
How to Enter Unlock Codes on Sony Ericsson Cell Phones (all models):
Question: After I restart my phone, the phone is asking again for SERVICE PROVIDER PIN. What shall I do to make it stop?
How to get the Emails to work on the Storm (Includes Service Books for email to function):
Step Action1 Insert NON Cingular SIM into device
18) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again
Substitute the 1 at the end with 7. So 2nd time try: #PW+YOURCODE+7#
4) HOLD ALT (Half moon key on the lower left side) and press: mepe (Please note that you will NOT see what you type on the screen)
17) Return to the main screen by pressing End Call and you should see your phone getting signal
4 Press Ok - If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information) - If the unlock code is correct, a success dialog will appear.
Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
Exception: If phone prompts 'Would you like your Blackberry to automatically select CDMA or GSM based on network availability', select No.
6) Type "MEPPD" (please note that you will not see what you type on the screen)
3) Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
8) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
3. Tap the Keyboard icon to open the virtual keyboard
1) On the main screen of the phone, press Call (Green Button)
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then continue with instructions, this is a glitch on the phone
How to Enter Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc)
16) Press the Back Arrow Button to exit and save settings.
http://www.cellunlocker.net for your unlock code
2. Now enter #865625# then select option 1 and then again select 1 and enter your 16 digits code
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.
10) Enter it and then press trackball to confirm and your phone is unlocked!
How to Enter Unlock Codes on Nokia phones
2 Power on the device - Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
How to Enter Unlock Codes on LG U8210:
4) For the Mobile Directory Number, put in your phone number in there
5) It will ask you for the unlock code. Enter it and then press jog dial once to confirm and your phone is unlocked!
Solution 2: If the phone says that the SIM lock has not been removed, ensure that the phone radio (wireless mode) is on.
4) For the Mobile Directory Number, put in your phone number in there
12) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
How to Enter Unlock Codes on Pantech C740: 1. Put AT&T SIM card in C740 2. Turn on 3. Enter #865625# on idle screen 4. SIM Unlock Process - Click Yes. 5. Enter 8 digits unlock code and click OK (soft key) 6. Re-enter the unlock code. 7. Unlock Process Complete 8. Click OK (soft key).
Question: Phone is asking for SERVICE PROVIDER PUK and a new password twice. I entered the code from yourselves but phone saying "Operation not supported by this SIM card".What should I do?
How to Enter Unlock Codes on LG U8110:
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
2) Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
Error Message: "The SIM Lock has NOT been removed from this phone"
18) Return to the main screen by pressing End Call and you should see your phone getting signal
5. Tap the blank area below the band selection box to open the unlock tool.
How to Enter Unlock Codes on Motorola phones:
13) Turn device off by removing battery, insert SIM of your choice if have not done so already. Turning device is necessary even if you have SIM of choice inserted.
How to Enter Unlock Codes on Blackberry Vodafone Storm (9500):
No AT&T/T-mobile Usage: This is a dual-band phone, it will NOT work in North America but will work fine in Europe, Asia, South America where they use the other set of frequencies.
3. In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. It's unlocked. Enjoy.In case you see the "Waiting for Activation Screen", hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.
Unlock Instructions for LG KU990 (Viewty):1. insert original sim card and turn phone on.2. Press telephone icon at bottom of screen to bring up the phone keypad3. Enter 2945#990#4. A menu will pop up, select sim unlock5. Enter your unlock code and press ok6. The phone will then reboot and the unlock is complete.Unlock Instructions for LG KF600:1. insert original sim card and turn phone on.2. Enter 2945#71001#3. A menu will pop up to enter the sim unlock code4. Enter your unlock code and press ok5. The phone will then reboot and the unlock is complete.Unlock Instructions for LG KF750 aka LG SECRET:1. Insert original sim card and turn phone on.2. Enter 2945#750#3. A menu will pop up, select sim unlock4. Enter your unlock code and press ok5. The phone will then reboot and the unlock is completeUnlock Instructions for LG CU915:1. Power ON your phone with an accepted SIM card.2. Type #865625#CODE3. Press OK4. Device is now unlockedHow to Enter Unlock Codes on LG Incite CT810:
Please power on the phone with the original card in and when phone fully powered on (you have access to the menu), then TYPE: # 3 6 4 # and press green button you'll get a error message and after it your see:Engineering menu Click "Options" Click "GSM Test" Select "Send AT command" Now you will see a new window with : Send AT Command type AT+CLCK="PP",0,"SERVICE PROVIDER PIN or NETWORK PIN" and press send. If you get Response "0 " phone is unlocked If you get 1 error, then make sure you have typed the code correct and try the other code If you don't have the original card or if the original card is not accepted because you flashed the phone with other firmware, then sorry but we can't help you.
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
10) Enter the code, Remember you ONLY have 10 chances to get it right
5 Press Ok - The device is now unlocked and should continue booting
How to Enter Unlock Codes on Cingular AT&T LG CU500:
15) Go to Settings, then Options, then Mobile Network, on the third row switch Network Technology to GSM/UMTS.
How to Enter Unlock Codes on CU575 / Trax and CU515
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
Solution 1: Please make sure you are entering the correct code and enter it using this method ##CODE# dial
How to Enter Unlock Codes on BlackBerry 7105t:
Question: Phone is asking for NETWORK PUK and a new password twice. I entered the code from yourselves but phone saying "Operation not supported by this SIM card".What should I do?
If your phone has a "JOGDIAL" (for example SonyEricsson K700i), then you must press the "down arrow" instead of the "left arrow" for step 3 & 5. By "Down Arrow" I mean directing the Jogdial down!
Unlock Instruction for LG TU720 (SHINE) and VU
How to Enter Unlock Codes on BlackBerry Storm (9530):
Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
8) Type in mepd (Please note that you will NOT see what you type on the screen)
Title: Special Code Required Dialog: Enter code to enable SIM Box for Code: 1-8 digits Options: Enable or Cancel
How to Enter Unlock Codes on LG U8150:
Please power on the phone with the original card in and when phone fully powered on (You have access to the menu), then TYPE: # 3 6 4 # and press green button you'll get a error message and after it your will see:Engineering menu Click "Options" Click "GSM Test" Select "Send AT command" Now you will see a new window with : Send AT Command type AT+CLCK="PN",0,"SERVICE PROVIDER PIN or NETWORK PIN " and press send. If you get Response "0 " phone is unlocked If you get 1 error, then make sure you have typed the code correct and try the other code
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
How to Enter Unlock Codes on LG KE970 Shine:
It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!
4. Tap Shift and then Ctl key to enable the keys.
VERIZON TOURS ONLY: Removing "Activation Required" on the screen or changing the Phone Number:
How to Enter MSL Code on Sprint BlackBerry Tour (9630):
5) After you have done that, press the Menu Button to Save the options and the phone will automatically restart
6) HOLD ALT (Left side Below @) and press: mepp2 (Please note that you will NOT see what you type on the screen)
How to Enter Unlock Codes on Pantech C150: 1. Put AT&T sim card in the C150 2. Turn on 3. Enter #865625# on the idle screen 4. Wait 2-3 seconds then the screen changes SIM unlock process 5. enter OK (soft key) 6. enter the unlock code
How to Enter Unlock Codes on Motorola MPX:
How to Enter Unlock Codes on Treo 750:
6) Inside Settings menu, Click Options, then Mobile Network, on the switch technology to 'Global' if that has not been done.
If you already have an unlock code and sim card but when you input code, it always says " unlock code not accepted, you have tried." You must update your ROM version. About 5% hp 6315 have this problem.This problem can easy be resolved with this ROM update ( ROM v1.00.38 )This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315dowload here : http://rebootitsmagic.com/ipaq/SP29760_6315.zip1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc.)2. Place the h6315 in cradle. connect it to USB and charger3. Double click on the hpRUU.exe to run the program4. View the Readme and if you wish to proceed Agree to the Terms and Conditions5. Click Next6. Click Next again to flash the device with the new ROM
6) It will ask you for the unlock code. Enter it and then press jog dial to confirm and your phone is unlocked!
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
3) In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number
How to Enter Unlock Codes on BlackBerry Tour (9630):
11) Press the Enter key (Button that looks like a backwards L arrow)
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
14) Go to Settings, then Manage Connections, then Mobile Network Options and set the Network Technology to GSM/UMTS.
How to Enter Unlock Codes on UTStarcom Quickfire: 1. Insert SIM into phone 2. From the phone pad dial #865625# and it will prompt for the codeHow to Enter Unlock Codes on BlackBerry Bold (9000), 8800, 8820, Curve (8300, 8310, 8320), Javelin (8900), Gemini (8520, 9300), & Onyx (9700):
please read instructions carefully before starting!
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
IF YOU HAVE TRIED TO PUT IN AN INCORRECT CODE 3 OR MORE TIMES PREVIOUSLY & YOU GET PHONE RESTRICTED SIGN, THEN YOUR DEVICE IS HARD LOCKED AND MUST BE UNLOCKED WITH WITH A CABLE AND HARDWARE BOX.
#pw+000000000000000+1# IF THE CODE IS REJECTED, DO NOT TRY AGAIN.
How to Enter Unlock Codes on Motorola CDMA and TDMA:
1) If you have issues with the phone not recognizing the network, make sure the radio is on by making sure it is not low on power.
HP iPaq Unlock Code Entry Instructions
1) From the mainscreen of the BlackBerry, press the green call button to enter the phone
Ensure you enter the codes in this manner ##CODE# (e.g. ##12345678#)
How to Enter Unlock Codes on LG Invision CB630:
16) Press the Back Arrow Button once to exit and save settings.
1. Insert a SIM card from a different network provider and turn on the Sidekick. A dialog screen comes up, prompting you for the code.
Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
How to Enter Unlock Codes on BlackBerry 8700/8700c/8700g:
How to Enter Unlock Codes on BlackBerry 8830:
7) Now click the Back Arrow Button (Next to the Red End Call button) and select Advanced Options and then SIM Card
How to Enter Unlock Codes on Blackberry 5xxx, 6xxx, 7xxx (Except for 7100):
1. On the Today screen, tap Start > Settings.
7) It will ask you for the unlock code. Enter it and then press trackball to confirm and your phone is unlocked!
How to Enter Unlock Codes on BlackBerry Pearl (8100, 8110, 8120, 8220):
How to Enter Unlock Codes on Palm Treo 650, 680, Centro:
Exception: If nothing is prompting up and you are making sure you are selecting each button by press the screen in, do a wipe handheld to reset the phone to manufacturer default: http://forums.crackberry.com/showthread.php?t=110075
4) Go to Settings (Button that has dots next to green call button), Click on Manage Connections, Select 'Turn All Connections Off'
Removing "Activation Required" on the screen or changing the Phone Number:
Please download and install Sierra Watcher. Once you have Watcher installed put the non-Cingular SIM into the card and Watcher will prompt you to enter the unlock code. Please make sure to enter the unlock code correctly.
1) On the main screen of the phone, press Call (Green Button)
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
- "Contact Service Provider" - or "Tamper Alter"- or "Wait Before Enter Special Code"- or "Contact Service'
ie. if your code is 000000000000000 then enter exactly:
17) Inside the Manage Connections, set Mobile Network to on.
Answer: This is because Motorola have added an anti brute force protection and if you enter to many codes, the phone will ask for NETWORK PUK and then it will refuse to accept the code even if is the right one.
6) HOLD ALT and press: mep2 (Please note that you will NOT see what you type on the screen)
1) Power phone on and turn off the radio (Turn Wireless Off option)
How to Enter Unlock Codes on all other LG cell phones:
2) If you follow the above instructions and code is accepted with the Network Technology set to GSM/UMTS and still not working, it may be the SIM needs to be replaced with a newer SIM Card.
Note: Remove any SIM that is currently in the phone. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
10) Enter the code, Remember you ONLY have 10 chances to get it right
6) Go to Settings, then Options, then Advanced Options, then SIM Card 7) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
I will supply you with 2 unlock codes. One will be the NETWORK PIN and the other the SERVICE PROVIDER PIN.
ie. #pw+000000000000000+7#The letter P appears after you quickly press 3 times the button star ( )The letter W appears after you quickly press 4 times the button star ( )The letter + appears after you quickly press 2 times the button star ( )The phone shows "SIM Restriction Off" and is unlocked!
How to Unlock LG KG800 or TG800 Chocolate:
How to Enter Unlock Codes on UTSTARCOM QuickfirePut original sim from carrier go to phone type #865625# and put the code
Exception: If phone says Code Error and the attempts stay the same, start off with 10 attempts and still says 10 attempts after enter code, then continue with instructions, this is just a glitch on the phone.
Enter code using onscreen keyboard when unlocking a Pocket PC Phones
1. Put a non cingular sim in the phone ,phone says invalid smart chip
1. Power ON your phone with not allowed sim card (one that didn't come with the phone)2. Type #865625#3. the phone will ask you to input the unlock code twice, just input the unlock code4. Device is now unlocked
Note: After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
How to enter codes for HTC (Example: Tilt, G1), Pantech (Example: Duo (C810), HP & all Windows Smartphones, Windows Pocket PC Phones:
How to Enter Unlock Codes on LG F2250:
How to Enter Unlock Codes on Treo 180, 270, 750:
Power on with incorrect sim, enter unlock code when prompted
3) Scroll to SIM CARD then press jog dial in once to select it
Please switch your phone off, take battery out. Put battery back in, power on the phone. Now the phone it will ask to enter NETWORK PUK. Now please DON'T TOUCH the phone for 2 hours. After 2 hours it will change screen! Now please enter the code received from us and 00000000 (eight zero's) as a new password. Now the phone will be unlocked.
8) Hit the Settings Button (Button that has dots next to green call button) and select 'Show Keyboard'
to get your unlock code, you can try trusted sites such as
Question: Why do I have to wait 2 hours before I can enter the code when phone asking for NETWORK PUK?
6) HOLD ALT and press: mepe (Please note that you will NOT see what you type on the screen)
9) Enter the code, Remember you ONLY have 10 chances to get it right
2) Need a SIM card inserted into the phone (Example: Verizon, At&t, T-mobile)
Answer: Follow the instructions from SERVICE PROVIDER PUK and after that it will never ask for the code again.
2) For FIDO phones try this first with 7
How to Enter Unlock Codes on LG U81xx:
In case you need to reset the phone without a SIM card first, type 277634## or 47328545454#.
7. Enter the 8-digit unlock code and tap OK when done.
Samsung Unlock Code Instructions: Model : Samsung 3G handsets, Zxxx & Dxxx, A707, U900 Series 1- Switch ON your phone with a non accepted SIM Card, 2- Compose: #7465625638CODE# (or #7465625638CODE#) Model : Samsung Z105 & Z107 1 - Switch ON your phone with a not Accepted SIM Card, 2 - Compose : #7465625638CODE# Model: Samsung i616 Jack or Blackjack2 from Fido Canada 1. Power ON your phone with a FIDO SIM Card that the phone is locked to 2. Type #7465625638 3. Network Lock Screen appear, enter UNLOCK CODE 4. Device is now unlocked Model: Samsung A767 (Propel), A437, T459 (Gravity): 1 - Power on without SIM 2 - Type in #7465625638Unlock code# (8 digit unlock code) 3 - Device should say: "Network Lock Deactivated" 4 - Phone may automatically reboot Model: Samsung SGH-T459 (Gravity): 1. Power on without SIM 2. From the standby screen, use the dial pad to enter the number sequence 3. Type in #7465625638Unlock code# (8 digit unlock code) 4. Device should say: "Network Lock Deactivated" Model: Samsung i900 / Omnia 1 - Switch ON your phone with a NON Accepted SIM Card, 2 - Enter the pin code of this refused Simcard 3 - Device is now asking for another pin code 4 - Then enter the Unlock Code ! Model: Samsung Zxxx, Dxxx, Pxxx & F490 (ex : Z140, D520, P200, etc.) 1 - Switch ON your phone with a not Accepted SIM Card, 2 - Compose : #7465625638CODE# Model: Samsung Z510 et Z320i et Z650i : 1 - Switch ON your phone with a not Accepted SIM Card, 3 - Compose CODE# Model : Samsung i450, i560 & i8910 1 - Switch ON your phone without SIM Card, 2 - Compose #PW+CODE+1# The letter P appear after press 3 times quickly the button star ( ) The letter W appear after press 4 times quickly the button star ( ) The letter + appear after press 2 times quickly the button star ( ) Model : Samsung i780 1. Insert an unaccepted SIM card 2. Enter the pin code to SIM card 3. At the top of screen an "exclamation mark" icon will appear 4. Click on "exclamation mark" icon 5. There will appear link "settings" - click on it 6. Virtual keyboard appears on screen with Enter PIN prompt. 7. Enter your 8-digit unlock code. Model : Samsung i900 1. Insert an unaccepted SIM card 2. Enter the pin code to SIM card 3. At the top of screen a "lock" symbol with the letters NET will appear 4. You will also be presented with the options "OK" "Dismiss" 5. Press the "OK" option 6. Virtual keyboard appears on screen (the "Enter PIN" prompt may or may not appear). 7. Enter your 8-digit unlock code. 8. Your phone is now unlocked Model : Samsung SGH-P207: 1. Reset to original factory setting by typing 27673855#, youre phone will reboot 2. Then insert a sim card that is from another network that your phone is not locked to. 3. An Wrong sim message will come up on the screen 4. When message appears type in #99983323# 5. At this time a white screen will appear which says "exit" 6. Tap the rigth soft key, (occasionally it will not go to the next screen, if so press the down key) 7. From the menu that appears scroll down to the malloc Fail option, this will reboot, and normal service screen will appear. 8. Then type 0141# and press the green call key, Personalized will appear on the screen, and the name of the current sim card provider will appear on the screen. 9. Turn phone off, and then turn on 10. Go to menu by tapping left soft key, then settings in bottom right hand corner, then choose option number 7 security, then choose option number 6 Sim Lock, select option 1 disable 11. Then enter 00000000 (eight zeros), the message will come up sim lock disabled with a check mark, your phone is now unlocked to use with other carriers. Model : All others Samsung 1 - Switch ON your phone with a not Accepted SIM Card, 2 - Phone will ask for "Password", 3 - You can now enter the Unlock Code we send to you. OR (if phone show "Insert Correct SIM Card") 1 - Switch ON your phone with a not Accepted SIM Card, 2 - Compose : #0111CODE# OR 1 - Switch ON your phone with an unaccepted SIM Card, 2 - The Phone will then ask for the Code or Password 3 - You can now enter the Unlock Code we sent to you."PHONE FREEZE: SIM Unavailable": We provide the "defreeze code" (the second code) as a benefit to our customers in addition to the unlock codeReasons for "Phone Freeze" 1. Inputting the unfreeze code rather than the unlock code into your handset. 2. Following the incorrect input procedure for your handset (these must be followed 100% correctly). 3. Handset automatically displaying "Phone Freeze" when an unaccepted SIM card is inserted into the handset, however when the accepted SIM card is inserted, the handset works fine. Unlocking the phone when in "Phone Freeze" In order to unlock your handset when the phone is frozen, you need to have access to the handset keypad. Please note the following information is not provided with any guarantee or warranty of success as the unfreeze codes we provide are issued free of charge as an added bonus with certain Samsung unlocking services. Option 1 (usually used with keypad Samsungs - U900 etc) While an unaccepted SIM card is inserted Enter the unfreeze code Hit OK (either the left soft key, or in the middle of the touch-field) Your handset may or may not display an unfreeze message Now enter your unlock code (see step 1 above to determine this) The phone should now unlock or Option 2 (usually used with touch screen Samsungs - F480 etc) With Original SIM card in handset Enter #7465625638UNFREEZE CODE Phone Unfrozen Input unaccepted SIM card into handset Enter #7465625638UNLOCK CODE# Your Phone should now unlock or Option 3 (possible with any Samsung handset) While an unaccepted SIM card is inserted Enter unfreeze code Hit OK Enter unlock code Your phone should now unlock
2) Type in ##MSLCODE then the green talk button (ie: ##123456 Green talk button)
If your phone is a 9700 or 9000 that requires a second code (ie.Bell), please repeat until step 6 and press mep4 to enter the second code.
How to Enter Unlock Codes on Siemens phones:#0001yourunlockcode# or#0000yourunlockcode#
19) As a reminder, if you ever remove the SIM card from your phone, you will need to set the Network Technology as GSM/UMTS again
6) When the device re-boots, Activation Required will be gone and the active carrier name will now appear.
Note: SIM is REQUIRED to unlock the phone. SIM card can be inactive, doesn't need to active. After phone is unlocked, remove the battery, insert SIM as desired and re-insert the battery. Phone MUST be restarted to use the new SIM card.
9) Type in mep2 or mepp2 and another screen will pop-up prompting for the MEP code (Please note that you will NOT see what you type on the screen)
SPRINT TOURS: If you need to remove the Activation Required, you will need to get the MSL code to remove it. Contact me on costs.
